Led UV Advantage in Printing Ink Cure Production Processing

1.Compared with the traditional ultraviolet lighting system, it can save at least more than 50% of electricity power.

2.UV LED --- Low heat radiation
Does not generate heat during operation, does not shrink the media, and the printer environment is not hot.
Under the irradiation of Uv LED, the surface temperature of the irradiated product material is lower than 5 degrees. Under the traditional mercury lamp irradiation, the surface printing material of the irradiated product heats up 60 degrees to 90 degrees. This causes the positioning of the printed material to shift, resulting in poor printing results.

3. UV LED--Environmental protection
No ozone gas is generated when emitting ultraviolet rays.Traditional mercury lamps contain mercury and are toxic. Improper handling can cause harm to soil, groundwater and even human health

4. UV LED --long life
The service life of the UV LED lamp is guaranteed by our 15,000 hours of actual running time, and does not depend on the number of opening and closing times. Uv LED has a service life of 20,000 to 30,000 hours in principle. The traditional mercury lamp tube has a high heat, and the service life is only 800 to 3,000 hours.

5.UV LED - Fast start.
Using UV LED to cure the ink immediately after operation, no waiting time. Uv LEDs can reach 100% power UV output without preheating. Traditional mercury lamps need to be preheated for 10 to 30 minutes, which takes a long time and wastes electricity.

6.UV LED --low heat generation
UV LED has low heat generation, which is far less than that of traditional mercury lamps. On the one hand, it improves the service life and on the other hand, it solves the health damage of workers caused by high-temperature working environment.

7. UV LED ---Low maintenance cost
The maintenance cost of Uv LED is almost zero. The use of uv LED curing equipment can save at least USD1500-2000 in consumables every year. The maintenance cost of traditional mercury lamps is relatively high, such as easy to break and easy to burn out.

8. UV LED --High intensity
The illuminance is strong, using high-power LED chips and special optical design, the ultraviolet light output reaches 14KW/CM2, or higher, the illuminating light intensity is twice that of the traditional mercury lamp, which greatly improves the production efficiency

9.UV LED--Low driving voltage
The driving voltage is low and safe. The driving voltage of uv led is 5 to 48 volts, which is much smaller than the 100 volts or even tens of thousands of volts of mercury lamps.

10.UV LED light- --- No limit emitting surface

Unrestricted shape of UV LED light-emitting surface, high degree of freedom, miniaturization, lightweight design. traditional mercury lamp with limitation, low flexibility shape.